b'PUMP SPECIFICATION 055M - STD - FL 55 m3 / Day / 100 RPM( 346 bbl / Day / 100 RPM )Available Models 055 M 0800 055 M 1200 055 M 1600Geometry: Single LobeOperating Speed: 50 - 500 RPMFree Gas Volume Fraction: 40% continuous56Orbit Helix - mm (in) 60.00 ( 2.362 )22 Swept Rotorangle: Intake cavity area - mm (in ): 884 ( 1.37 )Pump LiftH2O - m (ft) 800 ( 2624 ) 1200 ( 3936 ) 1600 ( 5248 )Rated Pressure kPa (psi) 8000 ( 1160 ) 12000 ( 1740 ) 16000 ( 2321 )Rated Torque N-m (ft-lbs) 560 ( 412 ) 839 ( 618 ) 1119 ( 824 )Rotor Top Connection mm (in) 7/8" API PinRotor Head Diameter mm (in) 41.30 ( 1.625 )ROTOR STATOR - STDOverall Rotor Length m (in) 5.80 ( 228 ) 8.45 ( 333 )11.10 ( 437 )Weight kg (lbs) 40 ( 88 ) 60 ( 132 ) 80 ( 176 )Nominal Rotor Drift OD mm (in) 48.26 ( 1.900 )Stator OD mm (in) 90.0 ( 3.54 )Collar OD (mm) 97.64 ( 3.844 )Connection Discharge - Intake 3 1/2\'\' NUE Pin - 3 1/2\'\' NUE PinStator Overall Length w TB m (in) 5.76 ( 227 ) 8.41 ( 331 ) 11.06 ( 435 )Weight kg (lbs) 100 ( 220 ) 150 ( 330 ) 200 ( 440 )Distance TB to Elastomer mm (in) 300 ( 12 )Tagbar/sub bottom connection 2 7/8\'\' EUE PinStator OD mm (in) FL - 90 ( 3.54 )Collar OD mm (in) FL - 90 ( 3.54 )STATOR - FLConnection Discharge - Intake 2 7/8\'\' EUE Box - 2 7/8\'\' EUE BoxStator Overall Length w TB m (in) 5.96 ( 235 ) 8.61 ( 339 ) 11.26 ( 443 )Weight kg (lbs) 103 ( 227 ) 153 ( 337 ) 203 ( 447 )Distance TB to Elastomer mm (in) 300 ( 12 )Tagbar/sub bottom connection 2 7/8\'\' EUE PinNOTETarget in Well Flow Rates m3/d( bbl/d )Target In Well Torque N-m ( ft-lbs )250 1200450 -RPM 80014001000200 1600 7001200m3/d bbl/d Ft-lbs300 -RPM 800 600N-m10001501200 500800 600400100 600 0800150 -RPM 400 300400 20050200200 1000 0 0 00% 20% 40% 60% 80% 100% 0% 20% 40% 60% 80% 100%Percent of Rated Lift Percent of Rated LiftMANTL reserves the right to change information contained in this document without prior notice.Contact your MANTL representative for additional information.'