PCP DRIVE SYSTEMS

 

PC PUMPS
PCP DRIVE SYSTEMS
ROD, TUBING & ACCESSORIES
PCP AUTOMATION
REPAIR SERVICES

DRIVES

As part of your COMPLETE PCP SYSTEM MANTL is proud to partner with OilLift Technology to offer high quality drives for your PCP application.

 

We repair and refurbish a variety of drives and seals.

 

Drivehead OVERVIEW (PDF)

 

drive 500

MB500 40hp

SPECIFICATIONS:

• Maximum motor size 40 hp / 1200 rpm
• Maximum recommended speed 500 rpm
• Zero Spill© Top mounted stuffing box
• Thrust bearing Ca 90 rating 25,900 lbs.
• Normally supplied with 23.6" 5V sheave 4 groove
• 1 1/4" polished rod
• API 3 1/8' 3000# R31 Studded mounting flange
• Hinged belt guard and easily removed polished rod guard

LIFE CYCLE COST ADVANTAGES

• Zero Spill© Top mounted stuffing box - readily field serviceable
at minimal cost
• Good Thermal capacity - the B500 has a cast housing that holds
8 liters of oil. The housing and oil absorbs the energy stored in the
fluid column for fast shut downs without damage to the lube oil
• Floating standpipe eliminates lower shaft seals and eventual leakage
thus preventing loss of lube oil
• No need to align the electric motor, Lifting brackets bolted to the
motor feet flange mount the motor squarely to the drive. Only the
motor sheave height needs to be set to properly align sheaves for
extended belt life.

ENVIRONMENTAL PROTECTION:

• Zero Spill© Top mounted stuffing box
• No need to remove drive to service stuffing box

ZERO SPILL© STUFFING BOX:

• Zero Spill© Stuffing Box eliminates oil spill clean-up costs.
• Over 10,000 drives with Zero Spill Stuffing boxes
are protecting your environment.

SAFETY:

• Centrifugal brake will work even if there is no oil, the wrong
oil or the oil is too cold to pour
• Braking does not depend on hydraulics
• Tamper proof - there are no brake adjustment controls
• Motor speed does not exceed Nema standards during backspin
• Oil immersed braking expected wear life 20 years
• No wear on brake engagement mechanism while turning forward
• No exposed polished rod below the drivehead
• Motor lifting brackets bolted to the motor feet make it safe  and easy to install the electric motor
• Polished rod guard is standard

KEY FEATURES:

• Zero Spill© top mounted stuffing box
• Flange Mounted T-Frame Motor for easy installation
• Easy Belt Alignment

BENEFITS

• Environmental Protection
• Low Operating Cost
• Reliable
• Safe

 

drive 500MB1000 75hp

SPECIFICATIONS:

• Maximum motor size  75 hp / 1200 rpm.
• Maximum recommended  speed 500 rpm
• Zero Spill© Stuffing box
• Thrust bearing Ca 90 rating 33,500 lbs.
• Normally supplied with 28" 6 groove 5V sheave
• 1 1/4" polished rod
• API 3 1/8' 3000# R31 Studded mounting flange
• Hinged belt guard and easily removed polished rod guard
• Weight with oil, sheave and belt guard 1,000 lbs

SAFETY

• Centrifugal brake will work even if there is no oil, the  wrong oil or the oil is too cold to pour
• Braking does not depend on hydraulics
• Tamper proof - there are no brake adjustment controls
• Motor speed does not exceed Nema standards during backspin
• Oil immersed braking expected wear life 20 years
• No wear on brake engagement mechanism while turning forward
• No exposed polished rod below the drivehead
• Motor lifting brackets bolted to the motor feet make  it safe and easy to install the electric motor
• Polished rod guard is standard

ENVIRONMENTAL PROTECTION

• Zero Spill© Top mounted stuffing box
• No need to remove drive to service stuffing box

 

MB1200 100hp

SPECIFICATIONS:

• Maximum motor size 100 hp / 1200 rpm
• Maximum recommended speed 500 rpm
• Zero Spill© top mounted environmental stuffing box
• Thrust bearing Ca 90 rating 33,700 lbs.
• Optional thrust bearing Ca 90 rating 58,800 lbs.
• Normally supplied with 28” 6 Grove 5V sheave
• 1 1/4”or 1 1/2” polished rod
• API 3 1/8” 3000# R31 Studded mounting flange
• Hinged belt guard and easily removable  polished rod guard
• Weight with oil 1200 lbs

SAFETY

• Motor speed does not  exceed Nema standards  during backspin
• Centrifugal brake will work  even if there is no oil, the wrong  oil or is too cold to pour
• Brake does not depend on hydraulics
• Tamper proof - there are no brake  adjustment controls
• No wear on brake engagement mechanism while turning forward
• No exposed polished rod below the drivehead
• Polished rod guard

EASE OF USE:

• Top mounted stuffing box - readily field serviceable at minimal cost
• No braking below 160 rpm so wells dump quickly and completely.
Less waiting time for service or flush by crews when pulling  polished rod, easier to restart, less rod problems.
• Two point lift system for balanced lifting with or without motor.
• Motor lifting brackets bolted to motor feet make it safe  and easy to install electric motor.
• No need to align the electric motor. Lifting brackets bolted to motor  feet flange mount the motor squarely to the drive. Only the motor  sheave height needs to be set to properly align sheaves for
extended belt life.
• Single acme screw for belt tension

 

BLOW OUT PREVENTERS

As part of your COMPLETE PCP SYSTEM MANTL is proud to partner with
Domino Machine Inc to offer a superior solution for blowout prevention.

Domino Blowout Preventer (PDF)

Blowout

 

 

 

blowout